Skip to content
Home / Products / Stencil Station

Stencil Station

Benchtop solder paste stencil printer

₹18,000+ 18% GST

₹21,240 including GST · GST invoice for input tax credit

FreeOne custom stencil for your board, 200 × 345 mm, worth ₹2,500, with every StencilStation. How it works

Quantity
  • Free shipping across India
  • Dispatch in about 10 working days
  • 12-month warranty
Part no.SS-STENCIL
DispatchUsually within 10 working days, with tracking
Warranty12 months on parts. Warranty details
InvoiceGST tax invoice (CGST + SGST or IGST) for input tax credit
PaymentUPI, cards and netbanking, or bank transfer (NEFT/RTGS). Need a quotation?
Stencil size200 × 345 mmOne standard frameless stainless stencil for every board
Max PCB size150 × 295 mmIn a printed holder made from your Gerber
Smallest pitch0402Component range 0402 and above
Stencil clampingSpring-tensionedClamp bars on 8 mm smooth rods, about 19 mm grip each end
AlignmentX · Y · rotationSide knobs for rotation and left-right, front knob for fine Y
Footprint44 × 63 cmBenchtop, rear-hinged frame on bearings

Full technical specifications

One pass, a whole panel printed

Real footage from our bench, nothing staged. A full panel goes in, the frame comes down, the side knobs line every pad up under the stencil, one squeegee pass, and every pad has paste.

Real time while aligning; sped up 2× during the paste spreading.

Stencils for your boards

Upload your Gerber, see the stencil and its printed holder in your browser, and have the steel stencil cut and shipped.

IncludedYour first stencil is free

Every StencilStation comes with one laser-cut 0.10 mm stainless stencil, 200 × 345 mm, for the board you choose. Claim it any time with your order number.

₹2,500 + GSTEvery stencil after that

Same steel, same size, cut from your Gerber and shipped in about 5 working days. Works with any 200 × 345 mm frame, not just ours.

Upload your Gerber The holder STEP and stencil DXF are free to download either way.

StencilStation — Benchtop Solder Paste Stencil Printer

StencilStation delivers production-grade solder paste printing in a compact, bench-top form factor. Designed to work seamlessly as part of your SMT assembly line, it ensures perfect paste deposition every time — whether you're running a single prototype or a batch of boards.

Key Features

  • Quick-lock PCB fixture for fast, repeatable board alignment
  • Adjustable stencil frame to accommodate different board and stencil sizes
  • Smooth squeegee mechanism for even, consistent paste layer
  • Works with standard SMT laser-cut stencils
  • Compact benchtop design — minimal footprint
  • Ideal for 0402 and above component pitches

Who Is It For?

Designed for electronics engineers, PCB assemblers, and hardware startups in India who need accurate, repeatable solder paste application without manual stenciling guesswork.

Made in India

Manufactured by Tejwani Industries Private Limited. Pairs with the PlaceStation pick and place machine and SolderStation reflow oven for a complete end-to-end SMT assembly workflow.

12 monthswarranty on every system
18+machines shipped across India
Engineer on callsupport from the people who built it
Made in Indiadesigned and built by our own team

Set up your StencilStation

Scroll through the whole setup, one move at a time. This is the real StencilStation CAD, with the Allen keys that come in the box.

  1. Out of the boxOpen the carton, lift out the stencil and the machine, screw in the side knobs. It fits beside PlaceStation on one 120 × 80 cm desk.
  2. Mount the stencilRaise the frame, loosen the six clamp button heads two turns with the 3 mm key, slide the stencil in and tighten them again.
  3. Any board sizeEvery board, up to 150 × 295 mm, uses the same 200 × 345 mm stencil and gets a holder printed to fit. Make yours from your Gerber.
  4. Tension itPush both shaft collars back and lock them, then turn the front knob until the stencil pulls flat.
  5. Fit the PCB holderSet the printed holder on the base plate (magnets hold it). Loosen the four rod holders with the 4 mm key, line each rod up with its socket in the holder and lock them.
  6. Square the boardPush the PCB into the holder's corner stop, lower the stencil and turn the side knobs until the pads sit under the apertures.
  7. Set front to backTurn the front knob to move the stencil over the pads. Loosen the collars only for big moves.
  8. PrintOne squeegee pass, raise the frame and lift the board out.
345 × 200 mmStencil frame
0402and larger components
6 kgShipping weight
StencilStation with the hinged stencil frame open over a PCB

Technical specifications

Numbers you can design around.

Stencil type
Frameless stainless-steel laser-cut stencils, 0.10 mm
Stencil frame
Rear-hinged on bearings, lowers flat onto the board
PCB fixture
3D-printed holder with corner stop and magnets on a steel base plate; generated free from your Gerber
Adjustment
Two side knobs (rotation / left-right) and a front knob (fine Y); GN 705 collars for coarse Y
Squeegee
Hand squeegee, one pass fills every aperture
Compatibility
Any standard laser-cut stencil trimmed to 200 × 345 mm

Why it's built this way

01

Corner stop, not guesswork

Every board is pushed into the same front-left corner of its printed holder, so you align once and print the whole batch.

02

Tension you can feel

Spring-loaded clamp bars pull the sheet flat. A flat stencil means no smear under the apertures and no bridging on fine pitch.

03

Your first stencil is free

Upload your Gerber, download the holder and the stencil file in your browser. StencilStation owners get the first stencil cut free.

04

Watch it set up

Scroll through the real CAD below: unbox it, clamp a stencil, fit the holder, align and print.

Stencil Station: common questions

What board sizes does it take?
Boards up to 150 × 295 mm. Every board uses the same 200 × 345 mm stencil, and we print a PCB holder with a corner stop to fit your exact outline, so each board lands in the same place.
Where do I get stencils?
Upload your Gerber on our Stencils page. It generates the holder (STEP) and the stencil file in your browser and quotes the laser-cut 0.10 mm stainless stencil at ₹2,500 + GST. Every new StencilStation includes one free.
How is the stencil aligned to the board?
The sheet is clamped and tensioned between two bars; side knobs move the board left-right and rotate it, the front knob sets fine Y. Once aligned you print a whole batch without touching the knobs again.
Does it work with stencils I already have?
Yes, any standard laser-cut stainless stencil trimmed to 200 × 345 mm clamps straight in.

Get the whole line and save

Stencil Station is in every bundle below.

Compare bundles

Buying for a company or institute?

GST quotation or proforma invoice the same working day. Purchase orders, NEFT/RTGS and a demo by appointment are all welcome.